Fuelk products for excavation companies
Fuelk’s products speed up and streamline the operations of an earthwork contractor. Fuel tanks and containers are moved quickly from one job site to the next because no time needs to be
wasted on emptying and cleaning them. The greatest benefit of our products comes through our Fuel as a Service.
Säiliöt ja lisävarusteet
IBC-TANK, 450 AND 970 LITERS
The Fuelk IBC-tank is designed for modern forest machines. The shape and functional structure of the package enable safe transport without having to tie the load down. The legs of the fuel tank can be adjusted to fit the spacing of bunks. The fuel tank is available with both manual and electric pump.
IBC-CONTAINERS, 2000 AND 2990 LITERS
FUELK IBC-containers are equipped with a 110% double casing and a catchment basin for operating units. Their dimensions are optimized for transport pallet dimensions and their shape makes it possible to stack them neatly during transport. The tanks come in two size categories: 2000 l and 2990 l. Fuelk IBC containers are UN type approved and have also been granted storage approval by Inspecta.
Fuelk-astiat
HYDRAULICS CONTAINER, 55 LITERS
Hydraulics container is meant for adding hydraulic fluid under field conditions. Fluid is added cleanly with a hose without open containers.
WASTE OIL CONTAINER, 55 LITERS
The waste oil container is intended oil changes in field conditions. Makes it possible to change oil easily and cleanly. Waste oil, oily filters and rags can be removed from the job site along with the container.
FUELK IBC-CONTAINERS
970 and 450 liters
Technical data and accessories
- Tank volume 970 or 450 liters.
- Easy to use, no time-consuming load securing.
- Adjustable legs
- UN type approved IBC tank
- Powder-coated
- 12 month warranty
- Designed and manufactured in Finland
1. Bottom plug
The fuel fuel tank can be fully emptied by removing the bottom plug.
2. Adjustable leg
Distance between legs is adjustable to fit the space between bunks of a machine.
3. Side bar
The side bar keeps the fuel fuel tank in place. No times is needed for securing.
4. Detachable end plate
The end plate can be removed during maintenance and inspection.
5. Stepping grate
Stepping grate is easy to step on. It is used as a platform when fueling a machine.
6. Fuel hose
Fixed fuel hose is always ready to use and protected against snow and ice.
7. Filling cap
Easy to check the fuel level through the large filling opening. The cap can also be turned with gloves on.
8. Replacement air vent
The replacement air vent valve is turned open while fueling.
9. Lifting beam
The fuel tank is easy to move with the lifting beam.
10. Lockable lids
The lockable lid makes it possible to store items.
11. Camlock connector
12. Replacement air vent
Open the replacement air vent valve during the refueling of a machine.
13. Pressure relief valve
Keeps the internal pressure of the fuel tank from rising too high.
| Weight when empty | Weight full | Total length | Width | Width including bar | Total height | Volume |
|---|---|---|---|---|---|---|
| 370 kg | 1200 kg | 276 cm | 75 cm | 94 cm | 120 cm | 970 l |
| 225 kg | 675 kg | 151 cm | 75 cm | 95,5 cm | 119 cm | 449 l |
FUELK IBC-CONTAINERS
2000 and 2900 liters
Technical data and accessories
- 110% double casing and catchment basin for operating units.
- UN transport approval and storage approval (Inspecta).
- Equipment under a lockable lid with gas springs
- Lift with a forklift from below or with lifting slings or beam from above
- Large service hatch/manhole into tank
- 2" inlet and overfilling protection
- 1" suction/breather connection with a valve
- 1" vacuum and pressure relief valve
- Required transportation markings
1. Level indicator
Shows how much fuel is left in the tank.
2. 3/4” suction and return connection
For heaters, portable generators, machine’s own pump.
3. 1/2” suction and return connection
For heaters, portable generators, machine’s own pump.
| Product | Volume | Total length | Width | High | Weight | Material |
|---|---|---|---|---|---|---|
| DTD-2000 | 2000 l | 204,5 cm | 115 cm | 147,5 cm | 650 kg | Steel s355MC (Fe52 pickled )/painted |
| DTD-2990 | 2990 l | 230 cm | 146 cm | 147,5 cm | 650 kg | Steel s355MC (Fe52 pickled)/painted |
HYDRAULICS CONTAINER
55 liters
Technical data and accessories
- Quick-release couplings
- Breather plug
- Made of polyethylene
- Screw cap
- Handles on sides
Hydraulics container is to be used for adding hydraulic fluid in the field. Add fluid cleanly with a hose without open containers.
WASTE OIL CONTAINER
55 liters
Technical data and accessories
- Made of polyethylene
- Screw cap
- Handles on sides
The waste oil container is intended for oil changes in the field. Makes it possible to change oil easily and cleanly. Waste oil, oily filters and rags can be removed from the job site with the container.
Ask for a quote for your company’s fuel maintenance!
Contact us through the contact form. We will reply to your request within one working day.
